Chapter 8 Troubleshooting
Vertical lines appear in scanned images.
Did you scan the document from the flatbed? |
|
|
| Clean the Document Bed of the Flatbed. | |
|
|
| |||
(Flatbed type) |
|
|
| For how to clean the Document Bed, refer to "6.3 Cleaning the Flatbed (Flatbed | |
YES | |||||
| |||||
|
|
|
|
| |
NO 
Are the upper/lower glasses and rollers inside the ADF
dirty?
YES
NO 
Is there any debris (paper powder or dust) on the docu-
ment?
YES
NO
Clean the upper/lower glasses and rollers inside the ADF.
For how to clean the glasses and rollers, refer to "6.2 Cleaning the ADF" (on page 117).
Remove the debris from the document.
Such debris on the document may be transferred onto the upper/lower glasses and rollers inside the ADF or the Document Bed of the Flatbed, producing vertical lines in the scanned images.
If you cannot solve the problem after taking the measures above, check the items shown in "8.4 Before Contacting Your Dealer or Scanner Service Provider" (on page 152), and then contact the dealer where you purchased the scanner or an authorized FUJITSU scanner service provider.
143