Chapter 4 Scan Parameters

4.1 FUJITSU TWAIN 32 Scanner Driver

The FUJITSU TWAIN 32 scanner driver is a driver software product that complies with the TWAIN standard. You can use this driver to perform a scan using a TWAIN-supported scanning application.

Usually, you first invoke a required scanner driver from the scanning application and configure your scanning settings in the scanner driver's setting dialog box. (Depending on the application settings, this setting dialog box may not appear.)

How to invoke a scanner driver depends on the scanning application you use.

For details, refer to the manual or help of the application you use.

In the FUJITSU TWAIN 32 scanner driver, you can configure various scan settings in the dialog box above.

For the major scan parameters, see the description below. For details, refer to the FUJITSU TWAIN 32 Scanner Driver Help.

Resolution

Specify a resolution for scanning images.

You can select a value from the predefined standard resolutions in the drop-down list. If a desired value is not listed, you can select [Custom] to specify the value (in increments of 1 dpi from 50 to 600 dpi).

By marking the [Predefine] checkbox, you can select one of three predefined settings, [Best], [Better], and [Normal], and this allows you to scan documents simply and quickly.

You can also customize the values of [Best], [Better], and

[Normal] as desired in the window that appears when the [...] button is clicked.

Scan Type

Specify the side(s) of document to scan.

The specifiable scan types are as follows:

•ADF (Front Side)

•ADF (Duplex) (fi-6670/fi-6670A/fi-6770/fi-6770A only)

•ADF (Virtual Duplex) (fi-6750S only)

•Long page (Front Side)

•Long page (Duplex) (fi-6670/fi-6670A/fi-6770/fi-6770A only)

•Flat Bed (flatbed type only)

•ADF (Back Side) (fi-6670/fi-6670A/fi-6770/fi-6770A only)

64