Chapter 1 Scanner Overview
| ADF Open Button (Common) |
| Opens the ADF. Push the buttons in to open the ADF. |
| Cable Cover (Common) |
| A cover to house the cablings inside to protect them. |
| The cables are let out from either side of the cover to avoid tangling. |
| CGA Board Slot |
| Remove the cover to install a CGA or optional board. |
| The |
| For details of the CGA board, refer to "A.4 Scanner Options" (on page 195). |
| Main Power Switch (Common) |
| Used to turn the scanner ON and OFF. |
Power Connector (Common) | |
| |
| A connector for a power cable. |
| Ventilation Port (Common) |
| An open port for ventilating hot air from inside the scanner. |
| SCSI Connector 1 (Common) |
| A connector for a SCSI interface cable. |
| SCSI ID Switch (Common) |
| Used to configure a SCSI ID (ID=5 by factory setting). |
| USB Connector 1 (Common) |
| A connector for a USB interface cable. |
CGA Board | |
| |
| For details of the CGA board, refer to "A.4 Scanner Options" (on page 195). |
USB Connector 2
A connector for a USB interface cable.
SCSI Connector 2
A connector for a SCSI interface cable.
23