Fujitsu MBA3147RC, MBC2036RC, MBC2073RC Aborting a connection request, Abort connection responses

1.5 Address frames

1.5.5.5Aborting a connection request

BREAK may be used to abort a connection request. The source phy shall transmit a BREAK after the Open Timeout timer expires or if it chooses to abort its request for any other reason.

After transmitting BREAK, the source phy shall initialize a Break Timeout timer to 1 ms and start the Break Timeout timer. Table 1.27 lists the responses to a BREAK being transmitted before a connection response has been received.

	Table 1.27 Abort connection responses
Response		Description
BREAK		This confirms that the connection request has been aborted.
Break Timeout		The originating phy shall assume the connection request has
timer expires		been aborted.

Figure 1.15 shows the sequence for a connection request where the Open Timeout timer expires.

Figure 1.15 Connection request timeout example

C141-C013 69