the card
Do not touch the contacts on the bottom part of the expansion card. Touching the contacts can cause electrostatic damage to the card.
Card retention clip
7 For full-length cards, press the front PCI card retainer to release the card.
8 Pull up on the card to remove it. To loosen the card you can slightly rock end-to-end, but do not bend the card sideways.
6 Push the top of the card retention clip down slightly, then rotate it out the back of the case to open it.

Chapter 4: Installing Components

4 Highlight the device (card) to be removed, then click Stop.

5 Wait for the PCI power LED adjacent to the selected PCI slot to turn off, then disconnect any cables that are attached to the card.

Caution

9 Put the card in an anti-static bag for storage.

100

www.gateway.com