Processors
6 If you are removing the VRM for the fourth processor, remove the VRM air baffle by pushing down on the top of the baffle and pulling the baffle away at an angle from the center brace.
7 Gently spread the retaining clips at each end of the VRM socket which makes the VRM pop up from the socket.
8
9
10
11 Replace the fibre channel module by following the instructions in “Installing or removing the fibre channel module” on page 108.
12 Replace the memory boards or memory board air baffles into memory slots C and D by following the instructions in “Installing and removing memory boards” on page 85.
13 Replace the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
14 Follow the instructions in “Closing the server case” on page 72.
www.gateway.com | 123 |