Chapter 4: Installing Components

Removing and installing the control panel

Removal and installation of the control panel and front panel board is the same, regardless of whether your server is equipped with the standard control panel or the optional local control panel (LCP).

To remove and install the control panel:

1

2

3 Disconnect the front panel cable from the front panel board attached to the back of the control panel.

4 Push the control panel out through the face plate of the server and store it in an anti-static bag.

5 Push the new control panel into the control panel opening in face plate of the server until it is securely seated.

6 Connect the front panel cable to the back of the front panel board located on the back of the control panel.

7 Follow the instructions in “Closing the server case” on page 72.

84

www.gateway.com