Follow the instructions in “Closing the server case” on page 72.

Chapter 3: Managing and Maintaining Your Server

12 Move the shorting block from pins 1-2 to pins 2-3 on the Boot Block Update jumper (J1B1) on the IMM module.

13

14 Restart your server, then press any key when the Gateway logo screen appears during startup. The System Options menu opens.

15 Select BIOS Setup utility, then press ENTER. The BIOS Setup utility opens.

16 Use the down arrow key to select Boot Manager, then press ENTER. The Boot Option menu opens.

17 Select your normal boot drive from the list, then press ENTER. The server will now boot normally.

Embedded Web Server

The Embedded Web Server has six firmware-resident Web pages:

System Summary Page—displays the overall system health and health indicators for individual sensors.

System Event Log—displays selected number of records from the System Event Log

Power—provides power and reset controls

IPMI Command—accepts IPMI hex commands or Native CLI commands and returns a response

Configuration—provides configuration controls for the embedded web server

Help—provides on-line help

Each page has navigation links on the left side for quick navigation to another page, plus an overall health indicator (directly above the navigation links).

Configuring the Embedded Web Server

To assign an IP address to the IMM advanced module:

1 Install GSM on the server agent. For more information on GSM, see “Gateway Server Manager” on page 36.

2 Open the GSM application.

50

www.gateway.com