Chapter 6: Configuring your RAID solutions

Configuring your ROMB RAID solution with the RAID Web Console

The Intel RAID Web Console provides full-featured, GUI-based configuration and management of optional ROMB RAID arrays. The RAID Web Console is accessed by using your Web browser and is installed as software, specific for your server’s operating system. The RAID Web Console provides:

A configuration wizard that guides you through the disk configuration process

LSI Logic FlexRAID functionality for seamless online expansion without interrupting server operations

RAID level migration

A consistency check to ensure parity and mirrored data accuracy

A performance monitor

The ability to change logical drive write, read, and cache policies after the logical drive configuration

The ability to save the configuration

The ability to spin down physical drives before their removal

The ability to view the current data transfer rate

Complete system monitoring capabilities

A RAID event tag

Web Console components

Web Console includes the following software components:

RAID Web Server, the client support module running on a RAID server that lets you manage a RAID server remotely from a browser on a client system. It does not require a locally installed RAID adapter or any specially installed software on the client system other than a browser. Just point the browser on a client at the address of the RAID server along with the access port address, then provide a password to enter the management utility.

RAID Server is a module that runs on a server configured with a RAID adapter that provides the connection from the host device (server) to a RAID array (on that server) and provides the tools to manage the array. It must be installed on each server that contains a RAID controller in order to manage the RAID configuration from within an OS (either locally or remotely) through a browser.

174

www.gateway.com