Replacing a hot-swap fan

Replacing a hot-swap fan

If you are adding redundant hot-swap fans to your server, you must update the FRU/SDR. For more information, see “FRU/SDR Load utility” on page 54.

Make sure that you replace a fan with an identical replacement fan.

Important

To replace a hot-swap fan:

1 Follow the instructions in “Preventing static electricity discharge” on page 65.

2 Follow the instructions in “Opening the server case” on page 66, but do not unplug or turn off the server.

3 Locate the fan to be replaced. An orange LED indicates a failed fan.

Fan LED

www.gateway.com

145