
Chapter 4: Installing Components
7 Remove the new front panel I/O board from its package and place it in the chassis, engaging the mounting tabs on the chassis with the slots in the new board.
8 Slide the front panel I/O board forward until it is seated on the mounting tabs, then tighten the blue, captive thumbscrew to secure the board. See “Torque settings” on page 64 for correct tightening specifications.
Blue, captive thumbscrew
Mounting tab
9 Connect the front panel I/O board and control panel cables to the new front panel I/O board.
Make sure that the pins on the front panel I/O board line up correctly
Important | with the front panel cable connector. |
|
10
11
Reinstall the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
Follow the instructions in “Closing the server case” on page 72.
144 |
| www.gateway.com |
|