
Setting up the hardware
7 Align each of the casters with its screw hole on the (new) bottom of the server and secure with one Phillips screw per caster (provided with caster assembly).
Caster
Screw
8 Remove the Torx screws securing the rack faceplate to the front of the chassis, then remove the faceplate.
9 Align the screw holes in the pedestal faceplate with the holes on the front of the chassis, then secure with the Torx screws you previously removed.
Insert and partially tighten four screws before inserting the remaining screws, then fully tighten the screws.
Faceplate
Torx Screw
www.gateway.com | 13 |