Chapter 4: Installing Components
Unlocking and lifting the memory board handle, then pulling the
Important handle to remove the memory board immediately disables power to the memory slot. If the server is not correctly configured for hot memory board replacement this will cause the operating system to crash, but will not electrically damage the system.
6
7 Install or replace DIMMs on the memory board by following the instructions in “Installing and removing DIMMs” on page 91.
8 Make sure the handle on the memory board is in the open/up position, then align the ends of memory board with the card guides at each end and insert the memory board into the memory board slot.
9
10
Push the memory board handle down into the locked position.
Follow the instructions in “Closing the server case” on page 72.
88 |
| www.gateway.com |
|