Installing and removing the ROMB (RAID on Motherboard) activation key and dedicated
5 Remove the PCI expansion card from PCI slot 7 (if installed) by following the instructions in “Cold installation or removal of PCI expansion cards” on page 104.
6 Remove the RAID activation key and RAID DIMM from their
7 Insert the activation key into its socket on the system board (see “System board” on page 5 for the location of the socket.)
Push the key into the socket until it is below the two retaining clips.
8 Pull the plastic tabs away from the sides of the DIMM socket. If you are replacing a DIMM, remove the old one.
www.gateway.com | 127 |