Gateway 9715 Fibre channel HBA manager software, Installing or removing the fibre channel module, To install or remove the fibre channel module:

Follow the instructions in “Preventing static electricity discharge” on page 65. Follow the instructions in “Opening the server case” on page 66.

Chapter 4: Installing Components

Fibre channel HBA manager software

The QLogic SANsurfer FC HBA Manager is a device management software suite for the installation, configuration, and management of QLogic-based HBAs. The software includes asset management, remote configuration, monitoring, physical identification (beacon), and loading of drivers onto multiple devices at one time.

The QLogic SANsurfer FC HBA Manager is available on the QLogic Web site and on the QLogic SANsurfer CD, which is a compilation of other QLogic applications, drivers, and interoperability resources. The QLogic SANsurfer CD is available at www.qlogic.com/products/sanmgmnt/sansurfer_tool.asp.

Installing or removing the fibre channel module

To install or remove the fibre channel module:

1

2

3 Remove the memory board or memory board air baffle from slot C by following the instructions in “Installing and removing memory boards” on page 85.

4 If you are replacing a module, disconnect any cables that are attached to the old module.

108 www.gateway.com