Gateway 9715 LED information, Color, LED Name, Function, Location, Description

LED information

LED information

The various subsystems in this server include LEDs that can assist you in troubleshooting your system. See the following table for a description of these LEDs and the information they provide:

LED Name	Function	Location	Color	Description
Power LED	Identify the	Front panel	Green	■	Off = Power is off (or S4/S5
	power state of				with ACPI)
	the system			■	On = Power is on (or S0 with
					ACPI)
				■ Blinking = S1 Low power
					state with ACPI
ID	Aid in server	Front panel and	Blue	On = Server identification
	identification	left back of		enabled
	from the back	system board
	panel
System	Visible fault	Front panel	Green or	■	On = No fault
Status/Fault	warning		Orange	■	Green blink = Degraded
				■ Orange blink = Non-critical
				■ Orange = Critical or
					non-recoverable error
Drive status	Hard drive	Front panel	Green or	■	Green on = Drive initializing
(general)	activity and fault		Orange	■	Green blink = Drive active
	status			■	Orange on = Drive or slot
					failure
				■	Orange slow blink =Drive or
					slot fault predicted or rebuild
					in progress
				■ Orange fast blink = Drive
					rebuild interrupted or
					rebuild on empty slot
Drive status	Drive activity and	Individual drive	Green or	■	Green blink - Drive active
(individual drives)	fault status	carriers	Orange	■	Green and orange
					alternating - Drive is on and
					is rebuilding RAID, or is on
					and in fault condition
				■	Orange blink - Drive is off or
					in fault condition
				■	Unlit - Drive is inactive or no
					drive installed in carrier
Memory board	Identify condition	On top of each	Green or	For location and description,
LEDs (8)	of memory board	memory board	Orange	see “Memory” on page 85.
	and DIMMs
		www.gateway.com			201