
Uninstall the Gateway Server Manager (GSM) software from your server. Follow the instructions in “Preventing static electricity discharge” on page 65. Follow the instructions in “Opening the server case” on page 66.
Chapter 4: Installing Components
Installing an Intel Management Module (IMM)To install an Intel Management Module (IMM):
1
2
3
4 Remove the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
5 Remove the memory boards or memory board air baffles from slots A and B, by following the instructions in “Installing and removing memory boards” on page 85.
6 Install the nylon standoff into the hole in the IMM module board which corresponds to the hole in the system board (see the illustration on page 125).
The snap fit end of the standoff go into the hole in the IMM module
Important | board. The snap lock end of the standoff go into hole in the system |
|
board.
Snap fit end goes into
IMM board.
Snap lock end goes
into system board.
124 | www.gateway.com |