Chapter 7: Troubleshooting

To restart and access the BIOS Setup utility:

1 At the Gateway Logo screen, press any key to access the System Options menu. The System Options menu opens.

2

3

Select the BIOS Setup Utility, then press ENTER. The BIOS Setup utility opens.

Correct any discrepancies, then save changes and exit.

Remove the top cover by following the instructions in “Opening the server case” on page 66, then make sure that all cables inside the case are attached securely. Also, make sure that the colored cable edges are aligned correctly and that the connectors do not miss any pins.

Warning

To avoid bodily injury, do not attempt to troubleshoot your server

problem if:

Power cords or plugs are damaged

Liquid has been spilled into your server

Your server was dropped

The case was damaged

Instead, unplug your server and contact a qualified computer technician.

If you have the correct test equipment, make sure that the new battery has power. Although unlikely, your new battery may be defective.

198

www.gateway.com