Follow the instructions in “Opening the server case” on page 66.

Chapter 4: Installing Components

2

3 Remove the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.

4 Disconnect the SATA and power cables from the SATA-to-IDE converter board on the back of the CD or DVD drive.

SATA-to-IDE converter board

5 Remove the front panel cable from the SCSI hot-swap backplane by following the instructions in “Replacing the SCSI hot-swap backplane” on page 139.

6 Press the blue release latch on the back of the CD/DVD drive carrier, then slide the drive carrier assembly out the opening in the front panel.

74

www.gateway.com