Follow the instructions in “Opening the server case” on page 66. Place the jumper back onto pins 1-2.
www.gateway.com
9
10
6
While the BIOS is being recovered, the monitor displays a blue screen and the server will beep continually. The process is complete when the server stops beeping.
7 Remove the bootable USB disk-on-keyor CD.
8 Turn off the server, then disconnect the power cords and all other cables connected to the server.
Reconnect the power cords and turn on the server. The BIOS recovery is initiated.
4 Follow the instructions in “Closing the server case” on page 72.
5 Insert a DOS-bootable CD (SCCD or current SUP CD) into the CD drive or a DOS-bootable USB disk-on-keycontaining a valid BIOS image into a USB port. For more information on creating a current SUP CD, see “Creating a DOS-bootable System Update Package (SUP) CD” on page 42.
The new flash BIOS image will not fit on a diskette.
Important

Updating the BIOS

3 Remove the jumper across pins 1-2 of jumper J4A3, then place the jumper across pins 2-3.

FRB3

BMC

FWHID

Disable

Reset

 

J8C1

J8C2

J8C3

159