Chapter 4: Installing Components
10
11 Replace the fibre channel module by following the instructions in “Installing or removing the fibre channel module” on page 108.
12 Replace the memory boards or memory board air baffles into memory slots C and D by following the instructions in “Installing and removing memory boards” on page 85.
13 Replace the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
14 Follow the instructions in “Closing the server case” on page 72.
The processor core VRM sockets are located on the system board,
Important under the center brace, however you do not need to remove the center brace to install or remove the VRMs.
To remove a processor core VRM:
1
2
3 Remove the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
4 Remove the memory boards or memory board air baffles from memory slots C and D by following the instructions in “Installing and removing memory boards” on page 85.
5 Remove the fibre channel module by following the instructions in “Installing or removing the fibre channel module” on page 108.
122 | www.gateway.com |