
Chapter 4: Installing Components
10 Secure the new power distribution board to the chassis with the seven screws you previously removed.
11 Connect all power cables that you previously removed from the power distribution board.
12 Reinstall the SCSI backplane by following the instructions in “Replacing the SCSI
13 Reinstall the power supply module (remove both if two were removed) by following the instructions in “Replacing a power supply module” on page 134.
14 Reinstall the system board by following the instructions in “Replacing the system board” on page 149.
15 Reinstall the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
16
17
Follow the instructions in “Closing the server case” on page 72.
Connect power to the server and restart.
138 | www.gateway.com |