Remove the memory board air baffle from the memory slot you intend to use.

Chapter 4: Installing Components

7

8

Push the memory board handle down into the locked position.

Follow the instructions in “Closing the server case” on page 72.

To add a memory board while the system is off:

1

2

3

4 Install DIMMs on the new memory board by following the instructions in “Installing and removing DIMMs” on page 91.

5 Make sure the handle on the memory board is in the open/up position, then align the ends of memory board with the card guides at each end and insert the memory board into the memory board slot.

6

7

Push the memory board handle down into the locked position.

Follow the instructions in “Closing the server case” on page 72.

90

www.gateway.com