Removing and installing the center brace

To install the center brace:

1 Align the center brace with the guides on both sides of the case and with the full-length PCI expansion cards to the back, then lower the center brace into the case until it is fully seated.

Center brace

2

3

4

Move the two center brace locks (located on both sides of and behind the center brace) toward the front of the case to lock the center brace into place.

Follow the instructions in “Removing and installing the processor air baffle” on page 67.

Follow the instructions in “Closing the server case” on page 72.

www.gateway.com

71