
Follow the instructions in “Preventing static electricity discharge” on page 65. Follow the instructions in “Opening the server case” on page 66.
Replacing the front panel I/O board
Replacing the front panel I/O boardTo replace the front panel I/O board:
1
2
3 Remove the processor air baffle by following the instructions in “Removing and installing the processor air baffle” on page 67.
4 Disconnect the front panel I/O board and control panel cables from the front panel board.
5 Loosen the blue, captive thumbscrew in the center of the front panel I/O board, then slide the board back until the mounting tabs disengage from the board.
Blue, captive thumbscrew
Mounting tab
6 Remove the board from the server and store it in an
www.gateway.com | 143 |