LED information
Your server has a SCSI hard drive and a USB flash memory device installed and the server continues to boot from the SCSI drive
The SCSI hard drive is set as the first Legacy Hard Disk Drive in the Legacy Hard disk drive order.
To change the boot order:
Make sure to document the boot order before it is changed. Also make
Important sure you have a backup of any data. After you have completed the tasks with the USB flash memory device, reset the boot order back to the original configuration.
1
2
3 When you see the Gateway Logo screen, press any key to access the System Options menu.
4 When the System Options menu opens, use the down arrow key to select Boot Maintenance Manager, then press ENTER. The Boot Maintenance Manager menu opens.
5 Select Boot Options from the menu, then press ENTER.
6 Use the down arrow key to highlight Select Legacy Hard Drive Order, then press
ENTER.
7 Use the down arrow key to highlight HardDisk Drive #00, then press ENTER.
8 Select Apply Changes, then press ENTER.
9
10 Select Reset System, then press ENTER.
11 After the server has rebooted, access the System Options menu as described in Step 3.
12 Select Boot Manager and make sure the USB flash memory device is shown as a selectable boot device, then exit the menu.
Expansion cards
Your server does not recognize an expansion card■Restart your server.
www.gateway.com | 217 |