¡¿¬ƒ
Figure 1: Connecting the Cables
➀ ISDN cable | ➃ Serial cable |
➁ Analog device #1 | ➄ A/C adapter |
➂ Analog device #2 | ⑥ Phone Adapter |
Note: Phone ports and adapters are only available on certain models.
After Connecting the Cables
After connecting the power and the ISDN cable to the DIVA T/A, wait at least 10 seconds for the DIVA T/A to initialize and then check the “D” and “LINK” LEDs. If they are both glowing steadily, then your DIVA T/A is operational (either from a previous configuration or because your line supports AutoSPID). Go to the section “What’s Next?” on page 12 and continue.
Note: Where AutoSPID is supported, the DIVA T/A installation is totally Plug and Play.
If the “LINK” LED is not glowing steadily, this indicates a problem with the ISDN line. Recheck all your cable connections.
DIVA T/A ISDN Modem User’s Guide 10