Hayes Microcomputer Products DIVA T/A ISDN manual Windows 95 OSR2

Windows 95 (OSR2)

Note: This install procedure is for Windows 95 Service Release 2 (OSR2). If you are using original release or Service Pack 1 (SP1) version of Windows 95, go to “Windows 95” on page 13.

To verify the version installed on your machine, go to Control Panel/System Properties and select the General tab. If you have Windows 95 OSR2 installed, you should see the letter “B”, as below:

Note: If you are using Dial-Up Networking, make sure you are using version 1.2. If you are running a previous version, you must upgrade to Dial-Up Networking 1.2, before you begin installing the DIVA T/A. Dial-Up Networking 1.2 is located on the DIVA T/A CD under the \MSDUN12 directory. Refer to your Windows 95 online help for information on how to install Dial-Up Networking.

1Power on your PC with the DIVA T/A modem connected (see the section “Connecting the Cables” on page 9. Windows 95 automatically detects the DIVA T/A and the New Hardware Found Window appears followed by the Update Device Driver Wizard.

2Insert the DIVA T/A CD into your computer’s CD drive.

3From the Update Device Driver Wizard window, click Next.

4Click Other Location.

DIVA T/A ISDN Modem User’s Guide 15