7If you have enabled AO/DI, select the X.25 tab, otherwise go to step 8.
Configure the X.25 options you want implemented on your DIVA T/A. Use the table below as a guideline.
Parameter | Description |
X.25 Version | There are two X.25 CCITT recommendations |
| available for selection, 1984 and 1988. This |
| information is provided by your Service Provider |
| and should match the X.25 recommendation |
| supported on the switch you are connecting to. |
Request | Determines who is charged by the X.25 network |
Reverse | for the call. Select No to pay for the call locally, |
Charging | or select Yes to charge the remote DTE. Select |
| Yes only if the remote system accepts reverse |
| charging, otherwise the call may not be |
| accepted. |
Throughput | Assigns a Throughput Class for the virtual |
class | circuit. The throughput class specifies the |
negotiation | effective throughput of the virtual circuit in bits |
| per second (bps). Effective throughput may be |
| limited by a number of factors such as level of |
| link utilization, network congestion, and host |
| processing. |
