Updating the DIVA T/A Firmware
This section contains procedures for loading new firmware.
Updating Firmware under Windows 3.x/WFW 3.11
Warning: When you update your DIVA T/A firmware, the current profile configurations might get erased. It is recommended, therefore, that you record your current settings and SPID numbers before updating (use the Windows Configuration Tool to view your current settings).
Follow these steps:
1Start the DIVA T/A Configuration Tool.
2Select the DIVA T/A and click Properties.
3Click Download and specify the appropriate path.
4Confirm the request.
5Verify the configuration of your DIVA T/A.
Updating Firmware under Windows NT and 95/98
Note: When you download new firmware, DIVA T/A will ask you if you want to export your current profiles. It is recommended that you export the profiles. This assures you have a backup available in the event the profiles are lost during the download. If the profiles do get lost, use the Import Profile command and copy the exported profiles back to the device.
To update your firmware:
1From the DIVA Eicon Terminal Adapters Program, select the DIVA Terminal Adapter to which you are going to download new firmware.
2From the File menu, select Download Firmware (or right click your mouse, and then select Download Firmware).
