Parameter | Description |
ISDN Cost | Billing Interval: Specifies the increments your |
Reduction | Service Provider uses to bill subsequent usage of |
Timers | your ISDN line (usage after the initial Billing |
(Continued) | Interval expires). For example if your Provider |
| charges $Y per minute for each minute |
| following the Initial Billing Interval, enter 60. |
| Note: Setting the timer to 0 disables it. The |
| Initial Billing Interval remains in effect. |
| Default: 60 seconds. |
Data Over | Specifies Data Over Voice Bearer Capability as |
Voice | the outgoing call type. |
(North | If voice calls are less expensive than data calls in |
America only) | your tariff area, you can select this option. DOV |
| calls are data calls made over a BRI line using |
| Voice Bearer Capability. |
| For DOV to work, the remote device to which |
| you are connecting must support incoming DOV |
| calls. |
8Click OK to close the Advanced window.
9Click OK to close the Configuration screen.
10If you want the profile you just configured to be active click OK; if you want another profile to be active, select it from the Default profile list and then click OK. The DIVA T/A restarts automatically and implements the profile you have selected.
After the DIVA T/A has restarted, check the D LED and Link LED on the front panel of the DIVA T/A. If the LEDs are steady, the DIVA T/A is working correctly; if they are not steady, check your configuration and try again. For more details on the LEDs, refer to “LED Status Indicators on the DIVA T/A” on page 106.
You are ready to use your ISDN connection. Continue at “Using the DIVA T/A” on page 73.
