Windows 3.x/WFW 3.11
If you are installing the DIVA T/A ISDN Modem on a system without a CD drive, it is possible to make disks from the DIVA T/A CD. To create the disks, follow the instructions in the MAKEDISK.TXT file located in the \WIN16\MAKEDISK directory of your DIVA T/A CD.
If you are going to use the DIVA T/A with RAS for WFW, RAS must already be installed with at least one modem (any modem will do, it is only needed to properly install the DIVA T/A and will later be removed). If you do not want to use RAS, continue at “Installing the DIVA T/A Software” on page 25.
1Power on your PC with the DIVA T/A connected (See “Connecting the Cables” on page 9).
2Insert the DIVA T/A CD into your computer's CD drive, or the DIVA T/A Win 3.x Setup disk 1 into your diskette drive.
3With any text editor, open the file MODEM.INF found in the Windows/System directory.
4Open the file WFWNTEI2.INF found on the DIVA T/A CD (\WIN16) or diskette.
5Copy the contents of WFWNTEI2.INF to the end of the MODEM.INF file; save the appended MODEM.INF file, and exit your text editor.
6Start the RAS setup program.
7From the RAS setup, change the unused modem to the DIVA T/A. Refer to the RAS online help to change modems.
Go to the section “Installing the DIVA T/A Software” on page 25.