Parameter | Description |
| Select Default to use the Throughput Class |
| specified in your network subscription, or select |
| one of the values between 75 and 9,600 bps. If |
| you select a bps value, the local and remote |
| DTEs can negotiate to use a lower value on a |
| |
Fast selection | Increases the amount of Call User Data that you |
| can include in the Call Request packet to 128 |
| bytes, and specifies the type of response |
| requested from the host. Fast selection is |
| designed for |
| |
| • NO: Turns off Fast Selection. |
| • WITHOUT RESTRICTION: Host replies |
| with a Call Accept packet that can contain |
| up to 128 bytes of data. The connection is |
| established and data transfer can occur. |
| • WITH RESTRICTION: Host replies with |
| a Call Clear packet that can contain up to |
| 128 bytes of data. The connection is |
| terminated. |
Closed user | Specifies the type of closed user group (CUG) |
group | subscribed to. CUGs can restrict the set of DTEs |
selection | calls can be made to or accepted from. Select the |
| option that corresponds to the CUG specification |
| in your network subscription. |
| • NONE: Does not subscribe to any CUG. |
| • STANDARD: Subscribes to a CUG. Enter |
| the CUG number in the Group Number box. |
| • OUTGOING ACCESS: Can receive calls |
| only from members of the CUG, but can |
| make calls to any DTE. |
| • BILATERAL: Can receive calls from or |
| make calls to only a specific DTE. |
