Windows NT 3.51
If you are going to use the DIVA T/A with RAS, RAS must already be installed with at least one modem (any modem will do, it is only needed to install the DIVA T/A and will later be removed). If this is the case, follow the steps below. If you do not want to use RAS, continue at “Installing the DIVA T/A Software” on page 25.
1Power on your PC with the DIVA T/A connected (see “Connecting the Cables” on page 9).
2Insert the DIVA T/A CD into your computer’s CD drive.
3Open any text editor.
4Using your text editor, open the file MODEM.INF found in the Windows\System32\RAS directory.
5Open the file WFWNTEI2.INF found on the DIVA T/A CD (\WIN 32).
6Copy the contents of WFWNTEI2.INF and append it to the end of the MODEM.INF file; save the appended MODEM.INF file, and exit your text editor.
7You must now start the RAS setup program. From the Control Panel,
8From the RAS setup, remove the unused modem or any other devices that use the same COM port as the DIVA T/A, add the DIVA T/A, and then exit RAS. Refer to the RAS online help for removing and adding modems.
9After exiting the RAS setup, you are prompted to reboot your PC. Click OK and allow your PC to reboot and Windows NT to restart. To shutdown the RAS server,
Go to page 25 and continue the section “Installing the DIVA T/A Software.”
