Dialing with Multilink PPP
When you establish a Multilink PPP connection, each B-channel connects to a remote-directory number. In some ISDN implementations each B-channel connects to a unique number. If this is the case, enter both numbers and separate them with the character “~” or “&”. For example, to make a Multilink PPP c onnection to the numbers 1-514-555-2345 and 1-514-555-2346 enter the numbers as follows:
Note: If your ISDN implementation requires two numbers and BACP/BOD is enabled (on both your DIVA T/A and the remote ISDN device), you have the option of entering only one number. BACP will try to discover the second number and connect to it. If you know the two numbers, however, it is recommended that you enter both.
For Windows 95/98 only. If you use “~” or “&” to separate the Phone-Numbers, deselect the “Use Country and area code” parameter on the Properties tab of Dial-Up Networking. Manually enter the Country Code, Area Code, and PBX Prefix (if required) for both numbers.
If both B-channels connect to the same number, the number need only be entered once.
Contact your Internet Service Provider (ISP) if you are not sure whether you need one or two remote numbers.
DIVA T/A ISDN Modem User’s Guide 77
