Hayes Microcomputer Products DIVA T/A ISDN manual Windows

Windows 95

Note: This install procedure is for the original release and Service Pack 1 (SP1) version of Windows 95. If you are using Windows 95 Service Release 2 (OSR2), go to “Windows 95 (OSR2)” on page 15.

To verify the version installed on your machine, go to Control Panel/System Properties and select the General tab. If you have the original or SP1 version of Windows 95 installed, one of the following screens appears:

Note: If you are using Dial-Up Networking, make sure you are using version 1.2. If you are running a previous version, you must upgrade to Dial-Up Networking 1.2, before you begin installing the DIVA T/A. Dial-Up Networking 1.2 is located on the DIVA T/A CD under the \MSDUN12 directory. Refer to your Windows 95 online help for information on how to install Dial-Up Networking.

1Power on your PC with the DIVA T/A modem connected (see the section “Connecting the Cables” on page 9). Windows 95 automatically detects the DIVA T/A and the New Hardware Found Window appears.

2Insert the DIVA T/A CD into your computer’s CD drive.

3In the New Hardware Found Screen, select Driver from disk provided by hardware manufacturer, and click OK; the Install From Disk window appears.

DIVA T/A ISDN Modem User’s Guide 13