Hayes Microcomputer Products DIVA T/A ISDN manual North America

Specify your ISDN Switch Type, Telephone Number(s), and Service Profile ID (SPID). Use the table below as a guideline.

Parameter	Description and Values
Switch Type	Specifies the ISDN switch type used by your
	ISDN service provider.

North America: For most locations use Auto-Detect (Default). If auto-detection is not possible, specify National ISDN-1 (NI-1) or AT&T (5ESS)

International (Excluding North America):

Europe (Euro ISDN), Japan (INS-Net64),

Australia - Microlink (TPH1962/TS013), and

Australia - OnRamp (Telstra's ETSI service).

The default setting is Europe.

Use 2 Numbers Activates the “2 nd Number tab”. Use the second number tab if your ISDN provider assigns two numbers.

Telephone

Number

(1st Number/2nd

Number)

Specifies your ISDN number(s).

Note: If you are using a North American version of the DIVA T/A and your line supports AutoSPID, ISDN numbers are automatically detected. For more information on AutoSPID, refer to page 96.

Service			Specifies your SPID Number(s). The ISDN
Profile ID			switch uses the SPID number to identify your
(SPID)			ISDN equipment. Your ISDN provider
(1	st	nd	assigns your SPID number(s).
		Number/2
Number)			Notes:
North America			If your line supports AutoSPID, SPID
only			numbers are automatically detected. For
			more information on AutoSPID, refer to page
			96.

Deselecting the SPID checkbox disables SPID terminal initialization and configures the port as a Non-Initializing Terminal. See Non-Initializing Terminal mode, on page 97.

DIVA T/A ISDN Modem User’s Guide 38