Installing the DIVA T/A Software
Before you proceed, make sure you have completed the pre- installation procedure relevant to your software platform. To find the procedure relevant to your platform, see page 12.
Note: There is no Setup Wizard for DOS or OS/2. If you are using DOS or OS/2, go to the section “Using the VT100 Configuration Tool” on page 60.
The DIVA T/A Setup Wizard installs all necessary DIVA T/A files on your system. These include:
•the DIVA T/A
•the Eicon DIVA Terminal Adapters Program, which includes the Configuration Wizard (Windows 95/98 and NT only)
•the Windows Configuration Tool (Windows 3.x & WFW 3.11)
•the DIVA T/A Uninstall Utility
To install the DIVA T/A Software:
1Insert the DIVA T/A CD, and enter d:\SETUP.EXE in the Run field of the Start menu or File menu (where d: is the drive letter of your CD drive). The CD Setup screen appears, go to step 2 and continue.
Note: If you are using disks to install the software on a
3.x/WFW 3.11 system, type a:\Setup.exe (where a: is your diskette drive). Skip to step 3 and continue. For more information on creating disks, read the Makedisk.txt file included on your CD.
