Parameter | Description and Values | |
Initial Billing | Billing Interval: Specifies the increments | |
Interval | your Service Provider uses to bill subsequent | |
Billing Interval | usage of your ISDN line (usage after the | |
initial Billing Interval expires). For example | ||
(Continued) | ||
if your Provider charges $Y per minute for | ||
| ||
| each minute following the Initial Billing | |
| Interval, enter 60. | |
| Note: Setting the timer to 0 disables it. The | |
| Initial Billing Interval remains in effect. | |
| Default: 60 seconds. | |
Update Date | Note: Models equipped with analog device | |
Update Time | ports. | |
| ||
| The DIVA T/A supports Caller ID (North | |
| America only). If you have a phone with call | |
| display and are receiving calls with the | |
| incorrect time or date, use Update Time to | |
| reset the date and calendar. | |
| If you power off the DIVA T/A, click Update | |
| Time when you turn it back on. This ensures | |
| that the correct date and time are set on the | |
| DIVA T/A. | |
|
|
11After completing the advanced parameters configuration, press Escape to exit the Advanced menu.
12From the Main menu, select Save Profile and press Enter to save the changes made to the profile.
13Select Restart. Verify that the correct startup profile is specified, and then press Enter.
After the DIVA T/A has restarted, check that the D LED and Link LED on the DIVA T/A’s front panel. If the LEDs are steady, the DIVA T/A is working correctly; if they are not steady, check your configuration and try again. For more details on the LEDs, refer to “LED Status Indicators on the DIVA T/A” on page 106.
Your DIVA T/A is configured for ISDN. Close your
