Honeywell DCP552 Mark II user manual Error Message List

Chapter 9. MEMORY CARD OPERATIONS

9 - 5 Error Message List

When an error occurs, error messages such as “Card Error-XX” (XX denotes error code) are displayed on the message panel during memory card operations. The table below lists the error codes and explain their meaning. Memory card operations are aborted when an error occurs.

To return to the normal display mode, press the DISP key.

Code	Meaning	Remedial measures
1	Card insertion failure or card removed	Do over.
2	Card write protect	Replace the card, or reset the protect by SLP550.
3	Card read protect	Replace the card, or reset the protect by SLP550.
4	Bad card	Replace the card.
5	Invalid card format	Initialize the card.
6	Card full	Erase unnecessary files, or initialize the card.
7	Card busy	Do over.
8	File write protect	Initialize the card.
9	Card access error	Do over.
11	Card access sequence error	Do over.
12	FAT abnormal	Initialize the card.
14	Card access sequence error	Do over.
	(in file control)
15	Card battery voltage drop (warning)	Replace the card, replace the card battery (If
		replaceable).
16	Wrong file version	Create new file, and create new data.
17	Data or file are missing.	Create new file, and create new data.
18	DCP552 data full (program load)	Delete unnecessary programs in the DCP552.
19	DCP552 hardware error (load error)	Do over.
20	Card data invalid	Do over.
21	Card data check sum error	Operate the instrument again, or check
	(program data)	the program setting of the DCP552.
22 to 36	Card data check sum error	Operate the instrument again, or check
	(parameter data)	the parameter setting of the DCP552.
37	Memory protect error	Set DCP552 variable parameter PA02 to 0 to
	(loading the data is protected by the	cancel protection.
	variable parameter PA02.)
43	No alternate areas remain on the	Replace the card.
	E2PROM card
44	Error occurred in writing to alternate	Replace the card.
	area on E2PROM card
63	Card battery voltage drop (error)	Replace the card, replace the card battery (If
		replaceable).
64	File abnormal (card was removed)	Create new file, and create new data.

9-12