Honeywell DCP552 Mark II user manual Data types

Chapter 5. FUNCTIONS

5 - 1 Data

■Data types

The data types are listed below.

For further information on data types, see “Chapter 7. PARAMETER SETUP”

and “Chapter 8. PROGRAM SETUP”.

Data	Parameter	Variable parameter
		Event configuration data
		PID parameter data (CH1)
		PID parameter data (CH2)
		Setup data
		Constant value control data (CH1)
		Constant value control data (CH2)
	Program	Pattern
		Event
		PID group and output limiter
		group number
		G.SOAK
		PV shift
		Repeat
		PV start
		Cycle
		Pattern link
		Tag

Data changeable in RUN mode

Event type data

PID group and output limiter group control parameters

PID group and output limiter group control parameters

Basic data only changeable in the READY mode

Constant value control SP, PID and other data

Constant value control SP, PID and other data

SP and time, SP and θ or SP and ∆SP data

Data for event 1 to 16

Data for PID group number used for control and output limiter group number

Data indicating whether G.SOAK is provided or not PV shift data

Data indicating whether repeat is used or not

Data indicating whether PV start is used or not

Cycle count data

Pattern link destination program number data Tag (8 characters) data

5-1