Honeywell DCP552 Mark II user manual Handling Precautions, DC current, DC voltage

Chapter 2. NAMES AND FUNCTIONS OF PARTS

●DC current, DC voltage

	Input type			Input range (FS)		Accuracy (under standard conditions)
Symbol		Code	Range No.
mA		C01	48	4 to 20mA	Programmable range	±0.1%FS
					-19999 to +20000
(Linear)		Z51	52	2.4 to 20mA		±0.1%FS
					(Decimal point
mV		M01	49	0 to 10mV		±0.1%FS
					position is variable.)
(Linear)		L02	50	-10 to +10mV		±0.1%FS
			51	0 to 100mV		±0.1%FS
mA		C01	128	4 to 20mA		±0.1%FS
(Linear)		Z51	134	2.4 to 20mA		±0.1%FS
V			129	0 to 1V		±0.1%FS
(Linear)			130	-1 to +1V		±0.1%FS
		V01	131	1 to 5V		±0.1%FS
			132	0 to 5V		±0.1%FS
			133	0 to 10V		±0.1%FS
O2 sensor *			135	0 to 1250mV		–0.1%FS	When converted to mV values
				Carbon potential	(CP value)
				indication range:
				0.000 to 4.000% C
				(Note, however, that PID control
				is calculated over the 0.000 to
				2.000% input range)
				Oxygen pressure indication range:
				0.000 to 1.500 x 10-20atm

*•The O2 sensor is manufactured by one of the following companies: Nihon Gaishi (NGK), Marathon Monitors, Cambridge, Corning, AACC (Advanced Atmosphere Control Corporation), Barber Colman or Furnace Control.

•PV2 in models with carbon potential compensation is tied to the O2 sensor.

Handling Precautions

•The unit for code Z06 is “K” (kelvin).

•Code F50 and P50 do not generate the PV lower limit alarm.

•The number of decimal digits for DC current and DC voltage is programmable from 0 to 4.

•The O2 sensor generates the PV upper limit alarm at values of 1375mV or above, but does not generate the PV lower limit alarm.

2-9