Honeywell DCP552 Mark II user manual DCP552 Parameter Work Sheet, Variable parameter setting

DCP552 Parameter Work Sheet

User name	:	Preparation date	:
Equipment name	:	Product name	:
Model No.	:DCP552	Tag name	:
Instrumentation staffer in charge	:	Business staffer in charge	:

■Variable parameter setting

No.	Item code	Item	Factory default	User		Settings and descriptions
			settings	settings
1	PA 01	Key lock	0		0	: Keylock disabled
					1	: Display of setup data settings disabled
					2	: Display of all settings disabled
					3	: Display of all settings disabled. Operation keys disabled.
2	PA 02	Memory protect	0		0	: Disabled
					1	: Program settings are protected.
					2	: Setup, variable parameters and event configuration
						settings are protected.
					3	: Setup, variable parameters, event configurations
						and program settings are protected.
					4	: Setup, variable parameters, event configurations
						and PID parameter settings are protected.
					5	: Program settings and all parameter settings are protected.
3	PA 03	Display channel setting	0		0	: 2 items are displayed for the selected CH
					1	: Simultaneous 2CH display of the same item
4	PA 04	Synchronous 2 channel	0		0	: asynchronous
		operation			1	: synchronous
5	PA 05	Program auto load	0		0	: OFF
					1	: ON
8	PA 08	Auto-tuning (CH1)	0		0	: AT not performed
					1	: Standard AT performed on currently used PID group
						in mode other than READY mode
					2	: AT writing overshoot-proof PID values to currently used
						PID groups in mode other than READY mode performed
					3	: Standard AT performed on PID groups A1 to A7 in
						READY mode
					4	: AT writing overshoot-proof PID values to PID groups
						A1 to A7 in READY mode continuously performed
9	PA 09	Auto-tuning MV lower limit (CH1)	0.0		–5.0 to upper limit %
10	PA 10	Auto-tuning MV higher limit (CH1)	100.0		Lower limit to +105%
11	PA 11	SP bias (CH1)	0 SPU		–10000 to +10000 SPU (CH1)
12	PA 12	PV digital filter (CH1)	0.0		0.0 to 120.0sec
13	PA 13	PV bias (CH1)	0 PVU		–1000 to +1000 PVU(PV1)
14	PA 14	Manipulated variable deviation	110.0		0.1 to 110.0% OUT / 0.1sec
		limit (CH1)
15	PA 15	Time proportional output cycle (CH1)	10		1 to 240sec
16	PA 16	On-off control differential (CH1)	50 SPU		0 to 1000 SPUm (CH1)
17	PA 17	PID computation initialize	0.0		–5.0 to +105.0%
		manipulated variable (CH1)
21	PA 21	SP bias (CH2)	0		-10000 to +10000 SPU (CH2)
22	PA 22	PV digital filter (CH2)	0.0		0.0 to 120.0sec
23	PA 23	PV bias (CH2)	0 PVU		–1000 to +1000 PVU(PV2)
24	PA 24	Manipulated variable	110.0		0.1 to 110.0% OUT/0.1 sec
		deviation limit (CH2)
25	PA 25	Time proportional output	10		1 to 240sec
		cycle (CH2)
26	PA 26	ON-OFF control differential	50		0 to 1000 SPU (CH2)
		(CH2)
27	PA 27	PID computation initialize	0.0		-5.0 to +105.0%
		manipulated variable (CH2)
31	PA 31	Group 1 event number	0		0 to 16
					(0: No delay is specified.)
32	PA 32	Group 1 delay time	0.0		0.0 to 3000.0sec
33	PA 33	Group 2 event number	0		0 to 16
					(0: No delay is specified.)
34	PA 34	Group 2 delay time	0.0		0.0 to 3000.0sec
35	PA 35	Group 3 event number	0		0 to 16
					(0: No delay is specified.)

1