Honeywell DCP552 Mark II user manual 19999 to +20000 SPU C45 not equal to

DCP552 Parameter Work Sheet

No.	Item code	Item	Factory default	User		Settings and descriptions
			settings	settings
34	C 34	Manipulated variable in PV	0.0		–5.0 to +105.0%
		overrange (CH1)
35	C 35	MANUAL change mode (CH1)	0		0	: Smooth
					1	: Preset
36	C 36	Preset MANUAL value (CH1)	0.0		–5.0 to +105.0%
37	C 37	End of operation (CH2)	0		0	: READY mode
					1	: END mode
38	C 38	Manipulated variable in READY	0.0		-5.0 to +105.0%
		mode (CH2)
39	C 39	Manipulated variable setting in	0		0	: No
		PV overrange (CH2)			1	: Yes
40	C 40	Manipulated variable in PV	0.0		-5.0 to +105.0%
		overrange (CH2)
41	C 41	Manual change mode (CH2)	0		0	: smooth
					1	: preset
42	C 42	Preset MANUAL value (CH2)	0.0		-5.0 to +105.0%
43	C 43	Service interruption time when	0		0 to 3600sec
		running can be continued
44	C 44	CP computation type	1		0	: oxygen pressure (PO2) computation
					1	: CP computation for NKG sensor
					2	: CP computation for Marathon monitors and Cambridge
						sensors
					3	: CP computation for Corning sensors
					4	: CP computation for AACC sensors
					5	: CP computation for Barber-Coleman sensors
					6	: CP computation for Furnace Control sensors
45	C 45	Auxiliary output 1 type	0		0	: SP1
					1	: PV1
					2	: Deviation1 (DEV1)
					3	: Manipulated variable 1 (MV1)
					4	: SP2
					5	: PV2
					6	: Deviation 2 (DEV2)
					7	: Manipulated variable 2 (MV2)
					8	: O2 sensor mV input value
46	C 46	Auxiliary output 1 lower limit (4mA)	0 SPU		–19999 to +20000 SPU (C45 not equal to 3)
					–1999.9 to +2000.0% (C45 set to 3)
47	C 47	Auxiliary output 1 upper limit (20mA)	10000 SPU		–19999 to +20000 SPU (C45 not equal to 3)
					–1999.9 to +2000.0% (C45 set to 3)
48	C 48	Auxiliary output 2 type	0		0	: SP1
					1	: PV1
					2	: Deviation1 (DEV1)
					3	: Manipulated variable 1 (MV1)
					4	: SP2
					5	: PV2
					6	: Deviation 2 (DEV2)
					7	: Manipulated variable 2 (MV2)
					8	: O2 sensor mV input value
49	C 49	Auxiliary output 2 lower limit (4mA)	0 SPU		–19999 to +20000 SPU (C48 not equal to 3)
					–1999.9 to +2000.0% (C48 set to 3)
50	C 50	Auxiliary output 2 upper limit (20mA)	10000 SPU		–19999 to +20000 SPU (C48 not equal to 3)
					–1999.9 to +2000.0% (C48 set to 3)
57	C 57	Programming item	0		0	: Displayed
		Event			1	: Not displayed
58	C 58	Programming item	0		0	: Displayed
		PID group, output limiter group			1	: Not displayed
59	C 59	Programming item	0		0	: Displayed
		G.SOAK, PV shift, repeat			1	: Not displayed
60	C 60	Programming item	0		0	: Displayed
		PV start, cycle, pattern link			1	: Not displayed

denotes items settable only on models with CP compensation

16