Honeywell DCP552 Mark II user manual Event on delay

Chapter 5. FUNCTIONS

•Event on delay

The number of the event to be delayed and the delay time can be set regardless of event type. The delay turns on the output for the duration of the delay when the event meets the conditions for going from OFF to ON. When this function is combined with the event standby function, the event on delay operates when the standby state is cleared.

•Segment event progress

•The output stays OFF until the program reaches a segment with an event. •The event goes ON or OFF according to the set value of the event.

•Previous settings are valid until segments with other event settings are reached. •Previous settings are valid when the program has reached segment number 1 using the cycle function or pattern link function. The output is turned off if there is no event in segment number 1.

•Other functions

Normal PV1 upper and lower limit operation event and normal PV2 upper and lower limit operation events operate in the READY mode.

PV upper limit			PV lower limit
Normal PV1 upper limit operation			Normal PV1 lower limit operation
Normal PV2 upper limit operation			Normal PV2 lower limit operation
	H			H
		PV			PV
	EV		EV
Deviation upper limit			Deviation lower limit
Deviation upper limit with standby			Deviation lower limit with standby
	H			H
		PV			PV
	SP+EV		SP+EV

Absolute value deviation upper limit

Absolute value deviation upper limit with standby SOAK absolute value deviation upper limit*

SOAK absolute value deviation upper limit with standby*

Absolute value deviation lower limit

Absolute value deviation lower limit with standby SOAK absolute value deviation lower limit*

SOAK absolute value deviation lower limit with standby*

H H

EVEV

SP

	H			H
PV
		EV	EV

SP

PV

Items marked * operate only in SOAK segments. Items marked * operate only in SOAK segments.

5-9