Honeywell DCP552 Mark II user manual Function test, Key Key test, 12-8

Chapter 12. CALIBRATION

■Function test

Press ↑, ↓, ←, →, keys to show (0.0.0.0) on upper display, then press ENTER

key.

●Key test (00-01)

Press SETUP key until the PROG/SEG display shows (00-01).

When you press each key, the data appears in the upper display (shown in Table 12-3) and in the lower display (shown in Table 12-4).

Table 12-3. Upper Display

￿￿￿￿￿	2.0.0.0		1.0.0.0.
	0.2.0.0.	￿￿￿￿￿￿￿￿	0.8.0.0.
	0.4.0.0.		0.0.1.0.
	0.0.4.0.		0.0.0.8.
￿￿￿￿	0.0.2.0		0.0.0.2.
	Table 12-4. Lower Display
	2.0.0.0.		4.0.0.0.
￿￿￿￿	1.0.0.0.	￿￿￿￿	0.8.0.0.
	0.4.0.0.		0.2.0.0.

Handling Precautions

1.When you press DISP key, calibration mode will be exited.

2.When you press SETUP key, the next calibration menu will be entered (Display test).

12-8