NFPA Standard-Specific Requirements

NFPA 72 Auxiliary Fire Alarm System

NFPA 72 Remote Station Protective Signaling System

Notes:

1.Cut Jumper JP30 on the MRP-2001/E main circuit board to supervise placement of the 4XTMF module.

2.Refer to "4XTMF Transmitter Module Installation" on page 29 for detailed information.

RS82 Remote Station Receiver UL listed.

Refer to Instruction Manual for Remote Station Receiver

Model RS82.

Cutting TBL Jumper allows the reverse polarity circuit to open

with a system trouble condition if no alarm condition exists.

 

Polarity Shown is

+

- Normal Standby

+

Power-limited

-

(Dummy load with a 4.7KΩ, ¼ watt resistor when no connection is made)

4XTMF Transmitter Module

Figure C.3 Remote Station Connection Using 4XTMF Module

120

MRP-2001 & MRP-2001E PN 53040:A 4/16/2007