Programming
PROGRAMMING
Maintenance Screen #2
Maintenance Programming Level
3.6.4To program the time and date into the control panel, press 1 while viewing Maintenance Screen #2. The following display will appear:
TIME AND DATE
1=TIME01:00A2=DATE 01012006 3=CLOCK FORMAT 12HRSTime and Date Screen
To change the time, press 1 to display the following screen:
ENTER TIME AS 12HRS
:
01:001=AM2=PM
Time Screen
A flashing cursor will appear on the left side of the display. Enter the four digit number corresponding to the time (0000 - 1259). When the fourth digit is entered, the cursor will move one position to the right. Press 1 for AM or 2 for PM to complete entering the time. The display will return to the Time and Date Screen displaying the new time.
To change the date, press 2 while viewing the Time and Date Screen. The following screen will be displayed:
ENTER DATE
MONTH DAY YEAR
Date Screen
A flashing cursor will appear on the left side of the display. Enter the two digit month, two digit day and four digit year. The cursor will move one position to the right after each entry. When the fourth digit of the year has been entered, the display will return to the Time and Date Screen which will show the new date.
To change between 12 hour and 24 hour format, press 3 for Clock Format while viewing the Time and Date screen. Each press of the 3 key will toggle the display between 12 HR and 24 HR format.
84 |