Honeywell MRP-2001, MRP-2001E 9

It is imperative that the installer understand the requirements of the Authority Having Jurisdiction (AHJ) and be familiar with the standards set forth by the following regulatory agencies:

•Underwriters Laboratories Standards

•NFPA 72 National Fire Alarm Code

•CAN/ULC - S527-99 Standard for Control Units for Fire Alarm Systems

Before proceeding, the installer should be familiar with the following documents.

NFPA Standards

This Fire Alarm Control Panel complies with the following NFPA Standards:

NFPA 13 Installation of Sprinkler Systems

NFPA 15 Water Spray Fixed Systems

NFPA 16 Deluge Foam-Water Sprinkler and Foam-Water Spray Systems

NFPA 72 National Fire Alarm Code for Local Fire Alarm Systems and Remote

Station Fire Alarm Systems (requires an optional Remote Station Output Module)

Underwriters Laboratories Documents for Reference:

UL 38 Manually Actuated Signaling Boxes

UL 217 Smoke Detectors, Single and Multiple Station

UL 228 Door Closers–Holders for Fire Protective Signaling Systems

UL 268 Smoke Detectors for Fire Protective Signaling Systems

UL 268A Smoke Detectors for Duct Applications

UL 346 Waterflow Indicators for Fire Protective Signaling Systems

UL 464 Audible Signaling Appliances

UL 521 Heat Detectors for Fire Protective Signaling Systems

UL 864 Standard for Control Units for Fire Protective Signaling Systems

UL 1481 Power Supplies for Fire Protective Signaling Systems

UL 1638 Visual Signaling Appliances

UL 1971 Signaling Devices for Hearing Impaired

CAN/ULC - S524-01 Standard for Installation of Fire Alarm Systems

Other:

NEC Article 250 Grounding

NEC Article 300 Wiring Methods

NEC Article 760 Fire Protective Signaling Systems

Applicable Local and State Building Codes

Requirements of the Local Authority Having Jurisdiction (LAHJ)

Fire•Lite Documents
Fire•Lite Device Compatibility Document	Document #15384
411UD Manual	Document #50759
411UDAC Manual	Document #51073

This product has been certified to comply with the requirements in the Standard for Control Units and Accessories for Fire Alarm Systems, UL 864, 9th Edition. Operation of this product with products not tested for UL 864, 9th Edition has not been evaluated. Such operation requires the approval of the local Authority Having Jurisdiction (AHJ).

MRP-2001 & MRP-2001E PN 53040:A 4/16/2007

9

Contents

Deluge • Preaction Control Installation, Operation and Programming Manual Page Page Page Page Page Page Page Page Page SECTION Product Description 1.1Product Features Page 1.2 Specifications 1.3 Controls and Indicators 1.4Components 1.5 Optional Modules and Accessories Installation 2.1 Backbox Mounting Page Page 2.2 Operating Power 2.3 Input Circuits Page 2.4Output Circuits 2.4.2 Special Application DC Power Output Connections 2.4.3 Relays - Programmable 2.5 Power-limitedWiring Requirements 2.6 Installation of Optional Modules Page 2.6.2 4XTMF Municipal Box Transmitter Option Module Page 2.7 ANN-BUSDevices Page Page 2.7.2 ANN-BUSDevice Addressing 2.7.3 ANN-80Remote LCD Annunciator 2.7.4 Specifications 2.7.5 Installation Page Page 2.7.6 ANN-S/PGSerial/Parallel Printer Interface Installation Page 2.7.7 ANN-I/OLED Driver Module Page 2.7.8 ANN-LEDAnnunciator Module Page Page 2.7.9 ANN-RLYRelay Module Page Programming 3.1 User Programming 3.2Initial Power-up 3.3 Programming Screens Description 3.4 Programming and Passwords 3.5 Master Programming Level 3.5.1 FACP CONFIG (Application Templates) FACP CONFIG 1=N/A 2=N/A 3=N/A 1=ENABLED YES 2=TYPE PULL STATION 3=OUTPUT CIRCUIT MAP INPUT ZONE 1 1=NOUN/ADJECTIVE 2=DESCRIPTION ZONE 1 TYPE 1=PULL STATION 2=N/A 3=MANUAL RELEASE Page 1=ALARM NAC 2=WATERFLOW NAC 3=RELEASE 4=SUPV BELL NAC 1=STANDARD ADJECTIVE 2=STANDARD NOUN 1=NORTH 1=3RD 2=SOUTH 2=4TH 3=EAST 1=BASEMENT 1=HVAC RM 2=BOILER RM 2=ISLAND 3=CLASSROOM Page 3.5.3 Output Circuits OUTPUT CIRCUITS 1=OUTPUT 1 2=OUTPUT 2 3=OUTPUT OUTPUT CIRCUITS 1=OUTPUT 1=ENABLED 2=TYPE EDIT OUTPUT # TYPE 1=RELEASE CIRCUIT 1 2=RELEASE CIRCUIT 2 3=ALARM NAC EDIT RELEASE CIR # 1=UNSUPV SHORTS 2=SUPV SHORTS RELEASE STAGES 1=RELEASE 1 ONLY 2=RELEASE 2 ONLY SILENCEABLE 1=SILENCEABLE 2=NON SILENCEABLE 3=SYNC MUTE AUTO SILENCE 1=NO 2=5 MINUTES 3=10 MINUTES AUTO SILENCE 1=15 MINUTES 2=20 MINUTES 3=25 MINUTES AUTO SILENCE 1=30 MINUTES CODING 1=STEADY 2=MARCH TIME 3=CALIFORNIA 1=TEMPORAL 2=FUTURE USE 3=FUTURE USE Page 3.5.4 Cross Input Zones CROSS INPUT ZONES 1=RELEASE 1 GROUPS 2=RELEASE 2 GROUPS REL 1 CROSS GROUPS REL CROSS GROUP 3.5.5 On-BoardRelays ON-BOARDRELAYS 1=RELAY ALARM 2=RELAY SYSTEM SETUP 1=FUTURE USE 2=TIMERS 3=BANNER SYSTEM SETUP 1=TIME-DATE2=TROUBLE REMIND NO 3=CHARGR DISABLE NO TIMERS 1=SOAK 2=SOAK SOAK # TIME 1=ALWAYS ON 2=ENTER MINUTES RANGE 10-30MINUTES WATERFLOW DELAY RANGE 00-90SECONDS AC LOSS DELAY RANGE 00-24HOURS SELECT BANNER 1=FACTORY BANNER 2=USER BANNER FACTORY BANNER PRESS ENTER IF OK USER BANNER-LINE1 TIME AND DATE 1=TIME 2=DATE ENTER TIME AS 12HRS 10:00 1=AM2=PM ENTER DATE MONTH DAY YEAR DAYLIGHT SAVINGS 2=START MONTH MAR 3=START WEEK 1=END MONTH 3.5.7 ANN-BUS 1=BUS ENABLED NO 2=BUS MODULES 3=AUTO CONFIGURE 1=ANN-S/PGOPTIONS 2=ANN-I/OOPTIONS 3=ANN-80OPTIONS 1=ANN-RLYOPTIONS 2=ANN-LEDOPTIONS ANN-BUSMODULES 1=ADDR 2=ADDR 3=ADDR ANN-BUSMODULE TYPE 1=NONE AUTO-CONGFIGURE IN PROGRESS PLEASE WAIT ANN-S/PGOPTIONS 1=PORT Page Page ANN-80OPTIONS 1=PIEZO ENABLE 2=LOCK ENABLE 3=ACK BTN ENABLE ANN-80OPTIONS 1=SIL BTN ENABLE 2=RST BTN ENABLE 3=DRL BTN ENABLE ANN-RLYOPTIONS IN ZONE ZONE 3.5.8 History HISTORY 1=VIEW EVENTS 2=ERASE HISTORY HISTORY 1=VIEW ALL 2=VIEW ALARMS 3=VIEW OTHER EVENTS ERASE HISTORY 3.5.9 Walktest WALKTEST 1=SILENT 2=AUDIBLE 3=VIEW EVENTS 3.5.10 Clear Program WARNING SYSTEM CHANGE PROCEED 3.5.11 Password Change 3.6 Maintenance Programming Level 3.6.1 Input Zones - Enable/Disable POINT PROGRAM 1=ZONE 1 2=ZONE 2 3=ZONE INPUT TYPE PULL STATION 3.6.3 Walktest 3.6.4 Time-Date 1=TIME01:00A 2=DATE 01012006 3=CLOCK FORMAT 12HRS 01:00 Operating Instructions 4.1 Panel Control Buttons 4.2 Indicators 4.3 Normal Operation 4.4 Trouble Operation 4.5 Alarm Operation 4.6Supervisory Operation 4.7 Disable/Enable Operation 4.8 Waterflow Circuits Operation 4.9 2nd-ShotWater Switch 4.10 Detector Functions 4.11 Time Functions: Real-TimeClock 4.12 Coded NAC Operation 4.13 Release Stages 4.14Special System Timers 4.15 Walktest 4.16 Read Status Normal 4.16.3 Output Circuits READ OUTPUTS 1=OUTPUT 1 2=OUTPUT 2 3=OUTPUT READ OUTPUTS 1=OUTPUT 4.16.4 Cross Input Zones CROSS INPUT ZONES 4.16.5 On-BoardRelays ON-BOARD RELAYS RELAY 4.16.6 System Settings 4.16.7 Timers SOAK 0 S 4.16.8 Daylight Savings ENABLED 4.16.9 History 4.16.10 PRINT PRINT 1=HISTORY 2=WALKTEST LOG 3=EXIT PRINTING 4.16.11 ANN-BUS BUS ENABLED NO 1=BUS MODULES 2=ANN-S/PGOPTIONS 1=ANN-80OPTION 2=ANN-RLYOPTIONS 5.1 Overview Power Supply Calculations 5.2Calculating the AC Branch Circuit 5.3Calculating the System Current Draw Page 5.4Calculating the Battery Size APPENDIX A A.1 Input-to-OutputCircuit Mapping and Cross-ZoneOperation A.1.1 Mapping Input Zones to Output Circuits for Direct Activation A.1.2 Mapping Input Zones to Release Circuits for Cross Zone Activation Page A.1.3 Complex Examples of Cross Zoning and I/O Mapping for Release Circuits APPENDIX B B.1 Template 7: Single Hazard - 3 Zone B.2 Template 8: Single Hazard - Cross-ZoneWith Manual Release B.3 Template 9: Dual Hazard - Combined Release B.4 Template 10: Dual Hazard - Split Release B.5 Template 11: Single Hazard - 3 Zones and Low Pressure B.6 Template 12: Single Hazard - 2 Zones Cross-ZonedWith All Active B.7 Template 13: Single Hazard - Dual Zone APPENDIX C Page Page C.1 NFPA 72 Auxiliary Fire Alarm System Page Page C.2 Central Station/Remote Station Transmitter: Connection to FACP Dry Contacts APPENDIX D FACP with Keltron APPENDIX E E.1 Testing E.2 Maintenance Page Page Page Page Page Page Page Page Page Limited Warranty