Honeywell MRP-2001, MRP-2001E YES, 2=TYPE, STEADY, NON-SIL, OUTPUT #, OUTPUT #, 1=ENABLED, ALARM NAC, 1=SILENCE, 3=SIL INHIBIT, 2=AUTO SILENCE, OUTPUT # 1=CODING, 3.5.3 Output Circuits

Master Programming Level Programming

3.5.3 Output Circuits

PROGRAMMING 1=FACP CONFIG 2=INPUT ZONES 3=OUTPUT CIRCUITS

Programming Screen #1

The options for the Output Circuits on the control panel main circuit board can be configured by pressing 2 while viewing Programming Screen #2. The following screens will be displayed:

OUTPUT CIRCUITS 1=OUTPUT 1 2=OUTPUT 2 3=OUTPUT 3

NAC Selection Screen

OUTPUT CIRCUITS 1=OUTPUT 4

NAC Selection Screen

The Output Circuits can be configured independently by pressing 1 for Output 1, 2 for Output 2, 3 for Output 3 or 4 for Output 4.

To program an Output circuit, press the number corresponding to the Output to be programmed. The following screens will be displayed for each selection:

	OUTPUT #
1=ENABLED		YES
2=TYPE	ALARM NAC
Output Screen #1
	OUTPUT #
1=SILENCE		NON-SIL
2=AUTO SILENCE		NO
3=SIL INHIBIT		NO

Output Screen #2

OUTPUT # 1=CODINGSTEADY

Output Screen #3

MRP-2001 & MRP-2001E PN 53040:A 4/16/2007 57